Thursday, November 21, 2019
Consumer behaviour Essay Example | Topics and Well Written Essays - 1250 words
Consumer behaviour - Essay Example Electric Bike An electric bike or a scooter is an enhanced form of conventional bike that is operated by a battery. According to Graham and McGowan, (2008), electric bikes were first developed in Switzerland in 1980. These bikes use rechargeable batteries with the capability of converting electrical energy into mechanical energy. They use direct drive or geared motor units. Electric motorized bicycles vary in cost and complexity. The key consideration associated with the acquiring of electric bikes is the range. This range is affected by factors such as battery capacity, motor efficiency, aerodynamics, weight of the bike and the rider (Lamy, 2001). Advantages of the Electric Bikes Jamerson and Benjamin (2009) assert that electric bikes are associated with numerous benefits as compared to conventional bikes or motors vehicles. They are effective for mountain climbing compared to conventional bikes because less energy and effort is required when riding them. Electric bikes are safer to use on rugged terrains or steep road junctions compared to cars. The running cost of electric bikes is lower compared to that of cars. Frequent use of the electric bikes enhances physical fitness. They vehemently promote green technology compared to motor vehicles or cars owing to the low energy consumption of the batteries. Their use reduces environmental pollution as it does not involve burning of fossil fuels like the case with vehicles. However, Jamerson and Benjamin (2004) warn that although these bikes reduce air pollution, some of their aspects such as disposal of worn out batteries pollute the environment. Hypothesis The consumer perception of the electric bikes is favourable. This is because it is technological enhanced compared to conventional bikes and associated with numerous benefits compared to motor vehicles or motor bikes. Aim The aim of the study is to identify the perception of the consumers towards the purchase of electric bikes. Objectives of the Study 1. To kno w the perception of the consumers toward electric bikes 2. To identify the awareness level of consumers on electric bikes 3. To determine the factors that influence consumer choice when buying 4. To find out other factors that affect the buying decisions of electric bikes 5. To find out the post purchase experiences and benefits of the electric bike to the costumer Some of the questions that will be included to gain insight on the proposed study include: 1. Are you informed about electric bikes? 2. How did you become aware of electric bikes? 3. How many members of your family are eligible for riding electric bikes? 4. Which features would you consider when buying an electric bike? among others Statement of the Problem Although the electric bikes have been on sale in the UK for some time, most people still prefer to use conventional bikes as compared to electric bikes (Drane et al., 2009). The research yearns to explore one of the factors that could be preventing customers from buyin g electric bikes. Sample The sample size will be 200 respondents. Survey Area The study will focus on the West End and East End districts of London. Half of the respondents will be outsourced from the West End region of London city while the rest will emanate from the East End district. This will enhance balance in terms of economic disparities i.e. the West End is characterised by the
Wednesday, November 20, 2019
An inevitable task of being social Essay Example | Topics and Well Written Essays - 1000 words
An inevitable task of being social - Essay Example When I had to mingle and put up with these new people, I felt kind of exasperated. I knew it was something that I had to do, but I would rather have gone off with people that I knew and were familiar with. Due to these thoughts running through my head, I knew that I was a little less than friendly towards those that were trying to make acquaintances. Some of the people that I meet are a little too overenthusiastic, and it quickly becomes unbearable to spend more than enough time with them. This event sticks in my mind because I know that I did not make a good first impression with everyone and I still feel guilty about that. I am not comfortable with dealing with so many people at one given time, and I know that this showed during that specific moment. I did not feel too positive about the outcome of what took place; on the contrary, the events of the day kept coming back to mind, making me feel increasingly uncomfortable about the whole ordeal. Though this was in regards to how I ac ted, and not about the fact that I do not always like mass social situations. I always feel that there is one person too many, and it is that person that will test my nerves the most. After all had been said and poorly done, I took the time to fully consider the situation I had repeatedly put myself in that day. The bad aspects of the day had involved my negative attitude towards those that had taken to me with a more positive approach; my less-than-polite responses did very little to help how others viewed me.
Sunday, November 17, 2019
Room division operation managment Assignment Example | Topics and Well Written Essays - 3000 words
Room division operation managment - Assignment Example There has to be a safety policy and safety committee which can give the consultation about health and safety of the organization. The act also stress on free personal protective equipment. But the employees have to make sure that the protective equipments should not be misused. Everybody should take care of self and others responsibly 2. Ã Ã Ã To minimize risk the primary step is to identify all the factors exposed to risk. The room division management has to identify the group of guests or employees who are especially exposed to high risk. Outsiders such as contractor, visitor or just a normal person might also be at risk. That has to be considered as well. Then one has to focus on existing risk control system, even if it is not satisfactory that has to be put into practice. Then evaluation and recording of the probability of an accident occurrence has to be done. Even the worst case should also be taken into account. Stress should be given on situation where the danger is imminent. Then immediately measures and precautions should be taken. Additional risk mitigation controls should be taken in priority. 3. Ã Ã Ã A United Kingdom Act of Parliament, the Data protection act 1998 recognizes the right to privacy as a fundamental right. It is especially applicable in the case of processing personal data. The definition of personal data considers the information that can be used to recognize a living individual. Room division operation rather the hospitality sector itself has the access to a lot of personal data of all the guests. However the freedom of information act 2000 modifies this act. The information about anyone should not be passed to any third party and should be protected from any abuse. Another point is that the website or public information system must not ask for personal data. 4. Ã Ã Ã Maintenance and design is the key tool to increase guest satisfaction. Cleanliness is the first thing that the guests ask from the hotel rooms. The success
Friday, November 15, 2019
Using a 3D Printer in Engineering
Using a 3D Printer in Engineering CE 2.2 Background Digitality is increasing each day. Very less people use 3D printers due to its high cost. And moreover, they are not portable as its calibration of stepper motors could be damaged. And small scale industries cannot afford them. So, my project is about making 3D printers that are size oriented, portable and cost effective. It will a project that would be hassle less and easy to understand and operate. It could be extremely useful to small scale industries, dental manufacture, scientific labs, toy companies and many more. CE 2.3 The reason behind choosing this project was to give a boost to small scale industries and make it easy to use. 3D printing is the technology of creating three-dimensional real time objects that has a nozzle which oozes out melted plastic element and is attached to a stepper motor which works as an axis that has two stepper motors working as two axis. The idea and objective was to build a 3D printer under 500-1000$ with compact size for easy handling. Its aims to print a real-time three-dimensional object with the help of CAD file (computer aided design file). It focuses on building a small sized, easy to use and accessible 3D printer. It is also a kind that has low maintenance. It is a kind of printer that was made with the help of regularly used electronics devices which would ultimately reflect on its cost price in the market. Also, other major thing is its size as it is compact compared to other available printers. CE 2.4 I had planned all the work that was required to do on this project that includes all the pre-study work before the commencement of the project and post-work that is required after finishing the project. I listed out things to do first and then assigned its priority. I started with doing research on selecting the topic for my project and after its approval from the faculty, and then I went on doing literature surveys with the help of IEEE papers, research papers etc. in the later stage I began learning basics of CNC machine and designing of its hardware structure. Which was then implemented along with its software part and was made a portable one. At last stage, it involved final changes on the project and making a report on it. CE 2.5 Personal Engineering Activity I started with literature survey and then made up a block diagram for my project as shown under. It explains the complete flow of my project. I divided the entire process of 3D printing into two parts. CE 2.6 This project makes use of many components and each component was selected considering its cost and its potential value in the market as well as its ability to withstand the project. The important parts are: For CNC Machine: 1. Stepper motor it is a kind of electric motor that is widely used in the industries of robotics. With each step of the motor, it makes it handy for repeatable positioning. 2. Stepper motor driver A4988 they are kind of drivers with microcontroller and that can be used to attain high rotation speeds in stepper motors. 3. CNC shield 4. Arduino Uno Microcontroller it is used for digital devices and interactive objects which can control and sense the objects in physical world. It makes use of open-source hardware and software. 5. SMPS power supply this is used to drive and supply power to the whole circuit 6. MDF/Acrylic for the body structure -it is used for outer covering or the hardware structure of the body. For 3D Printing Setup 1. 0.75mm Nozzle it is cylindrical kind of a pipe or tube which controls the liquid. 2. Ceramic heater 3. DC fan as a cooling device 4. PLA element CE 2.7 For the 3D printer, a structure had to be made from either MDF, acrylic or fiber that would form the outer body. It also requires 4 stepper motor and its driver ICs along with providing a power supply. The stepper motor moves as per the GCODE which controls it. A software is used to generate the GCODE that is indirectly connected and formed from CAD file. CE 2.8 The working of my software part can be described as below: 1. Computer part: Here, using different software like AUTOCAD, RHINO, CAD360, a CAD file is generated. The interpreter receives the CAD file formed and then converts it into GCODE file. For interpreting software like MERLIN, CURA, POLULU was been used. Then via serial port the GCODE file is sent to the other part i.e. the printing part. 2. 3D printer part: Stepper drivers and HotEnd drivers receive the GCODE file from the GCODE interpreter. The HotEnd has a nozzle, DC fan and a ceramic heater and the stepper motor makes the moves as per the GCODE. Into the nozzle, a PLA plastic element is entered and with the help of ceramic heater it melts that plastic element into very small sized threads and is constantly cooled with the help of DC fan. As the HotEnd and stepper motor moves, the PLA comes out through it giving a 3D printed object. The object is made layer by layer and the stepper motor sets itself to initial stage after the completion of the object CE 2.9 During this project, I faced many challenges as my project is a very complex topic. It started with doing research on the topic. It was a new technology in the market and I had to collect as much information available. Deciding of hardware components was also a major task I had a pre-defined project cost that I had to maintain so that the final costing of the product doesnt increase beyond the limit. I took help from the experts from the field of electronics and tried to follow their footsteps whenever problem occurred. The part of software was quite easy than I thought as I had already planned the flow of the work so I just had to follow that pattern to accomplish my microcontroller programming. CE 2.10 Summary In 3D printing, whole process takes place in tiny little slices, it divides the whole project into tiny pieces which are made in the reverse order while printing. They stick together to form a solid object slice by slice. All the parts made from 3D printing can be complex like hinges, wheels etc. as a part of the printed object. It is a kind of technology which is very useful in current world. It makes the object feel like a real one. My project required great knowledge while implementing. It was a great platform for me to learn new technology and to help small scale industry with my project. My creativity skills were expanded and with the help of my project guide I could overcome all the challenges that came on the way. I kept my guide and supervisors updated with my position of the project. And meeting were kept fortnightly to show my status on my project and to discuss further possibility of the project expansion.
Tuesday, November 12, 2019
Curbing college drinking starts with a change in attitude Essay
The article by Sarah Fritz deals with a very acute issue of todayââ¬â¢s reality: college drinking. She draws on horrifying statistics showing that 1,400 college students die each year because of alcohol and 600,000 are assaulted by another drunk student. We are used to assaults and rapes related to alcohol, but few would connect it with the deaths of such a large number of young people. Fritz makes one think that drinking can be more harmful and dangerous than we are used to think. At the same time, the author is sceptical about the prospects of fighting alcohol dependence with the methods, currently used on campus. I agree with her where she says that college officials may not be really interested in fighting the problem, because any mention of drinking incidents on some particular campus will hurt the reputation of this university. So if they are interested in hushing things up, then there is hardly a chance that drinking will go away any time soon. Besides, the bad example set by the previous generation mentioned by Fritz still works. Students know that their parents drank in their college youth and many of them turned out all right. As a result, students are convinced that adults are exaggerating the problem and trying to deny them what made the fun and joy of their own youth ââ¬â happy partying with friends. Students may be afraid to try some new unknown drugs, but they know that humanity used alcohol since the time of Ancient Greeks and this did not bring the civilization to ruin. Perhaps a massive campaign against drinking can have effect, but only to a certain point, since the young always want to try out things even if they look dangerous. For this reason the effect will be limited. In addition, young people for the most part value having a good time above everything else, and for many people good time is closely connected with alcohol. They simply do not know any other way to spend their time in a more exciting way than binging with friends, and teaching them other ways is extremely difficult. Wanderman, Richard. One Personââ¬â¢s Path to Literacy. Wandermanââ¬â¢s story has many meanings. On the one hand, it gives an idea of how a person with disabilities adjusts to the world designed for normal people. On the other, it give insights into the process of learning, so deep and simple that virtually every person can use them to achieve success in some field. Wanderman does not ask for pity, nor does he write his story to express his bitterness about the world that was harsh on the disabled man. He opens his story with stating that he has a successful career, a nice house and a family. The author seems to have no hard feeling against nature or God that has made him this way. His journey from inability to improvement was his own making, and in this sense he is a self-made man indeed. Reading his story is highly useful for all of the healthy people who enjoy the benefits of good health they received at birth and forget that this blessing was not given to anybody. Basic things like reading a book or getting good grades in public school can be a challenge to these people, something worth remembering for all. The things Wanderman learned through his learning experience can be useful to all of us, since we all come across challenges in our lives. He very perceptively describes how he learned that a man can be stupid and incapable in one area and at the same time smart in another. His lesson that practice makes perfect is also very important to learners who despair at the first failure. He also learned that his father was right when he told him that ââ¬Å"bumps would build characterâ⬠(Wanderman 2000). Stating that he is happy to have a lot of character because of his trials, although he would not like to repeat his path, Wanderman gives comfort to those who are going through a black streak in their lives. Although they are going through difficulties, this is going to mould their characters in such a way that they are better able to meet the next set of difficulties to come. Logan, Paul. Rowing the Bus. Paul Loganââ¬â¢s story touches a cord with everyone who was once insulted or humiliated by a school mob or any other group of people enjoying scapegoating. It also touches a cord with anyone who has seen abuse of the vulnerable, but was too scared to defy the mob. The story tells about things many of us have encountered but were too ashamed to bring up in public discussion. Paul goes through an evolution in his attitude to bullies. In the first school, he believes them to be inevitable because of his poor clothes, fatherless family, lisp, crossed eyes and poor skill at sports. When one reads these stories, one often wonders why teachers never did anything to accommodate the child who was so different from the rest and clearly suffered from other childrenââ¬â¢s attitudes. Why didnââ¬â¢t they change something about the team selection process if they saw that it was humiliating to the one in the group who most needed protection? Anyway, Paul was obviously left on his own to combat the class, and this instilled in him very strong fear of being the one at the bottom. The fear was so strong that he rejects George who is even more vulnerable than he was in the new school. However, Georgeââ¬â¢s hurt look triggers a revolution in Paulââ¬â¢s mind. He suffers from pangs of conscience so strong that finally he overcomes his fear in the incident with Donald, a high school bully. He is so successful that from now on all school bullies behave quieter when he is on the bus. They recognise that Paul has the strength to defend his views that developed under the influence of his own negative experience. Thus Paul succeeds in becoming sort of moral authority for the school. His influence on the others is positive, and for himself this action symbolizes threshold to maturity, a transition from boyhood to manhood. He is no longer the vulnerable one ââ¬â on the contrary, he is able to protect the others. Still, he is left with the vision of George that he will hardly let go in the nearest future. Frost, Robert. Mending Wall. Mending a wall describe a slow, methodical process through which two neighbors are trying to isolate themselves from each other. They continue mending the barrier between their properties even when they feel that ââ¬Å"something there is that doesnââ¬â¢t love a wallâ⬠(Frost 1915). The two neighbors have different views on neighbourhood and the necessity of the wall, yet they are working together to maintain the old and rundown thing. The neighbor who has a pine forest wants to maintain the wall since he learned from his father that ââ¬Å"good fences make good neighboursâ⬠(Frost 1915). He does not question this saying, probably like he does not question any truths he learned from his Dad. The wall in his thinking is something that probably stood there for centuries and now is expected to stand at least for his lifetime. This neighbour is eager to devote time and effort to repairing the old wall, even though it is difficult to keep it in the same condition and stones and balls will not balance. The author seems to be more open to neighbors. He does not really want to keep a wall because he does not believe that it will improve his relationship with the neighbour. On the contrary, he does not think there is any threat from the neighborââ¬â¢s house or pine forest that will not jump over to his land and eat his apples. Frost probably does not have a strong sense of property and is not so much afraid to share something that is his with others. He insists that fences make sense as a barrier to cowsââ¬â¢ movement, but since there are no cows really, it makes no sense to keep them. The little poem makes one think about oneââ¬â¢s attitudes to neighbours. It looks like there are two kinds of attitudes: either one maintains a fence around oneââ¬â¢s property and does oneââ¬â¢s best to keep the others out, or one does not care for fences. I do not think that there is a right or wrong choice here. It all depends on the way of communication one is comfortable with, although I would definitely prefer to do without fences.
Sunday, November 10, 2019
How to Solve a Rubik Cube
How to solve a Rubikââ¬â¢s cube The purpose of this report is to inform the audience on how to solve a Rubikââ¬â¢s cube in three simple steps. Solving a Rubikââ¬â¢s cube can be difficult; however by solving one layer at a time, and knowing the correct algorithm to use for each desired move, makes solving a Rubikââ¬â¢s cube easier than it looks. Introduction Invented by mechanics in 1974. There are over 43 quintillion possible combinations for solving a Rubikââ¬â¢s cube. That is 43,252,003,274,489,856,000. (information-facts). I am going to teach you how to solve one side of the cube. Which then puts you in position for solving the middle layer of the cube.That lastly enables you to execute the final layer effortlessly. Body I. The first step in solving one side of a Rubikââ¬â¢s cube is done by making a cross with whichever color you choose to start with. Using the algorithm ââ¬Å"F' T L' T'. â⬠(algorithm list) A. After completing the cross, the edge pieces ar e then put into place completing the first layer. Using the algorithm R' B' R B. II. The second step is putting the middle pieces in the correct domicile in order to finalize the middle layer. A. There are two algorithms used depending on if you are moving a piece to the left or right side of the middle layer.T R T' R' T' F' T Fâ⬠for moving a piece to the left side. And T' L' T L T F T' F' for the right side. III. The third and final step is solving the last layer. Starting out by executing a cross on the top of the cube by performing F R T R' T' Fââ¬â¢. A. Then fixing the cross by orienting the pieces in their correct positions. Using R T R' T R T T R'. 1. Followed by positioning the edge pieces in their correct places by doing T R T' L' T R' T' L. a. Leaves you with the final algorithm, which simply rotates the corner pieces that are already in their correct places. By doing an easy out, out, in, in, move R' B' R B, until the cube is complete.Conclusion I went over how to solve a Rubikââ¬â¢s cube step by step, starting out with the first cross and layer, to the middle layer, and the final cross and layer. If anyone would like me to email them my algorithms I would be glad to do that. And I know the process seems a bit confusing so you would like help learning to solve the cube on your own using the algorithms I can also provide some assistance with that as well. I hope this presentation helped you understand how to solve a Rubikââ¬â¢s cube. References A Rubikââ¬â¢s cube has 43,252,003,274,489,856,000 possible combinations. | Information Facts. (n. d. ).Information Facts ââ¬â Facts of the world, Crazy facts, What a information, Interesting facts. Retrieved February 12, 2013, from http://www. information-facts. com/shocking/a-rubiks-cube-has-43252003274489856000-possible-combinations (0), M. R. (n. d. ). Algorithm List ââ¬â How to Solve a Rubik's Cube. www. personal. psu. edu. Retrieved February 12, 2013, from http://www. personal. ps u. edu/mjr5125/blogs/how_to_solve_a_rubiks_cube/algorithm-list. html Out of the Cube: Augmented Rubik's Cube. (n. d. ). Hindawi Publishing Corporation . Retrieved February 12, 2013, from http://www. hindawi. com/journals/ijcgt/201
Friday, November 8, 2019
Gettysburg - fictional account essays
Gettysburg - fictional account essays Message written in a leather-bound book, found in an abandoned cabin in backwoods Pennsylvania: Whoever has found this basic diary now reads the story of George McClellan. Having lived 80 long but blessed years, Ive outlived my wife and children. I suspect that God will call me home soon, in this, the year of our Lord 1926. Before I go, I find it necessary to relate to you a part of my life that must not be forgotten. By reading this account, you have been selected to pass on a piece of history that would otherwise be lost. Hear my words well. Seventeen. Such a young age to kill, seventeen. Seventeen years seemed little preparation for watching my friends shot at my left and right and, rather than mourn the tragic losses of these fine young men, hit the ground and come back swinging. No thoughts. Only instinct. Duck, roll, load, fire. Dodge, jump, kill. All at seventeen. The road there might have been long, but time was endless in this eternal war. I didnt know what war we were fighting back then. What happened to the ninety days war? I remember signing up for a short and decisive victory, my friends and I all eager to escape the confines of school. The schoolgirls were swooning over us for our bravery. We loved the attention, but we never thought the act brave. War sounded beautiful. War sounded gratifying. War sounded like an escape from our tedious lives. We were so immature. Our innocence would soon be ripped from us, leaving our souls bleeding. Three years passed. We were stationed in Gettysburg, Pennsylvania. It was late at night and the third day of this, the bloodiest battle of the civil war. Nearly 35,000 men had died just in the previous two days. Now I was twenty and a skilled veteran. Somehow, a few of my closest friends and I had managed to survive. We were together in the in the federal 12th corps. It was late that night that we attacked rebel forces to regain abandoned trenches and t...
Subscribe to:
Posts (Atom)